User`s manual

DIGITAL-LOGIC AG MPC40/A/B/C, MPC41 Manual V1.4C
9
1.9 Explanation of Symbols
CE Conformity
This symbol indicates that the product described in this manual is in compliance with all ap-
plied CE standards. Please refer also to the section “Applied Standards” in this manual.
Caution, Electric Shock!
This symbol and title warn of hazards due to electrical shocks (> 60V) when touching prod-
ucts or parts of them. Failure to observe the precautions indicated and/or prescribed by the
law may endanger your life/health and/or result in damage to your material. Please refer also
to the section “High Voltage Safety Instructions” on the following page.
Warning, ESD Sensitive Device!
This symbol and title inform that electronic boards and their components are sensitive to
static electricity. Therefore, care must be taken during all handling operations and inspec-
tions of this product, in order to ensure product integrity at all times. Please read also the
section “Special Handling and Unpacking Instructions” on the following page.
Warning!
This symbol and title emphasize points which, if not fully understood and taken into consid-
eration by the reader, may endanger your health and/or result in damage to your material.
Note...
This symbol and title emphasize aspects the reader should read through carefully for his or
her own advantage.
Danger
This symbol and title warn of general hazards from mechanical, electrical,
chemical failure. This may
Endager your life/health and/or result in damage to your material.