User`s manual

DIGITAL-LOGIC AG MPC40/A/B/C, MPC41 Manual V1.4C
97
9.11.1.3 I/O Device Configuration
Feature Options Description
Serial interface
A:
Seraial interface
B:
Disabled
Enabled
Auto
OS Controlled
“Disabled” turns off the ports.
“Enabled” requires a manual base address
and an IRQ.
“Auto” configurates through PnP resources
for the interface.
“OS Controlled”: The BIOS leaves the as-
signing of the resources to the operating sys-
tem and reserves no resources.
Parallel Port: Disabled
Enabled
Auto
OS Controlled
„Disabled“ turns off the serial interfaces.
„Enabled“ requires a manual base address
and a IRQ.
“Auto” configurates through PnP resources
for the interface.
“OS Controlled”: The BIOS leaves the as-
signing of the resources to the operating sys-
tem and reserves no resources
Mode Output only
Bi-directional
Output only is the standard protocol for the
unidirectional operation.