User`s manual

DIGITAL-LOGIC AG MPC40/A/B/C, MPC41 Manual V1.4C
99
This list is subject to a permanent update and extension.
The right column contains a not final list of the devices supported by PHOENIX
Possibly not all devices of the list are directly supported due to space problems. The service team of Digital-
Logic is responsible for individual wishes of customers.
PHOENIX:
Device Manufacturer Interface
USB HUBS D-Link DSB H7 (8 port)
D_Link H4 (4 port)
SANTE (4 port)
USB MIN SIIG Hub (4 port)
Belkin Express Bus (8 port)
NCI Hub (4 port hub)
ADS Ultra Hub (4 port hub)
Friendly Net Hub (4 port hub)
Connect at least 6 USB Hub in to the
Platform. Connect all USB devices to
them.
Most of them should be detected and
function as usual.
USB Key-
boards
USB BTC KB Model: 7932
USB Otronic M/N: Scorpius 980N
NEC
CHERRY M/N: G80_3400_100
Connect USB KB in to the USB Hub with
PS/2 KB.
It should function as usual.
USB Mice USB MS InteliMouse 1.1A
USB Belkin mouse
USB AVB ID: HQXPC97010_06
Interex M/N: MOSXU
Logitec M/N: M_UA3T
InteliMouse Explorer
Connect USB Mouse in the a USB Hub
with the PS/Mouse. It should function as
usual.
USB Floppies TEAK Model FD-05PUB
TEAK Model FD-05PU
Mitsumi (no model No.)
Sony ITC
Y-E DATA ver. 3.12
VST Model: FDUSB-M Y-E Data
Connect at least 2 USB FD in to the one
of the USB Hub with the Legacy Floppy.
They should function as usual.
USB ZIP Drives IOMEGA 100 MB ZIP Drive
IOMEGA 250 MB ZIP Drive
Connect both USB ZIP drives in to the
USB Hub.
One is functional.
USB Hard
Drives
USB 2.2 GB ORB HDD
USB DiskOnKey (DOK) Ver 21D
Connect both USB HDD drives in to the
USB Hub and boot to DOS.
They should function as usual.
USB CD-
ROMS
Panasonic KXL-RW20AN 4X
IOMEGA ZIP CD-ROM
TEAK USB CD_ROM (CDWE54E)
Addonics CD-ROM
Addonics CD-RW
Addonics DVD
Connect all USB CD-ROM and IDE CD-
ROM as 1 st boot device and boot to
DOS.
USB LS-120
Drive
Imation Super Disk LS-120 Matsushita
Addonics Super Disk LS-240
Connect USB LS-120/240 and boot to
DOS.
Should be directly connected to the M/B.