User guide

153 | P a g e
** ERROR ** Unable To Read Partition Table The partition table could not be read from the specified unit.
This indicates either an invalid unit was specified, or there is a hardware failure
** ERROR ** Unable To Select Specified CP/M Drive The specified CP/M drive is invalid, and cannot be
selected.
** ERROR ** Unable To Locate Specified Partition The specified partition name could not be located in the
partition table on the specified device.
** ERROR ** Specified Partition Is Already Assigned The specified partition is already assigned to the
same or a different CP/M drive. The partition must be unassigned before it can be reassigned to a
different CP/M drive.
** ERROR ** Partition Table Is Incorrect Version The partition table form number does not match, so
the partition table cannot be used. This indicates that the partitioning program and assign
program came from different version of Quikstor CP/M.
** ERROR ** Attempt To Unassign Drive A: An attempt was made to unassigned the partition from
CP/M drive A:. This would result in a system crash, and cannot be allowed.
** ERROR ** Specified Partition Is Not A CP/M Partition The specified partitions category code
indicates that the partition has been assigned to a different operating system.
QSMAP Logical to Physical Drive Mapping Utility
QSMAP provides a convenient way of temporarily reassigning or "remapping" the logical CP/N drives
(A: - P:) to the physical devices in the system. This can be useful for changing the logical A: drive
from one physical device to another, and even allows mapping the RAM disk to the A; drive. Any
physical device may be mapped to any logical drive with the only restriction being that the A:
drive MAY NOT be mapped to an undefined device.
The command syntax for QSMAP is:
QSMAP (?) (drive: TO drive:) (, drive: TO drive:) ...................