User guide

PRECAUTIONS
In order to get the most reliable operation from your QUIKSTOR Winchester unit, follow
these precautions.
Don't operate or store the unit in environments with temperatures below 60 degrees F
or above 80 degrees F.
Don't subject unit to any shock or vibrations at any time - especially during operation.
Situate the unit where vibrations will be at a minimum. If you have room on the floor
under the desk or table where the computer is situated, this will be best. Cable
extensions of a few extra feet can
be ordered if you cable is not long enough. The unit should not be placed on a table
where a printer is located, as an operating printer causes vibration.
Don't restrict air flow to the unit. This unit requires ample air circulation to keep itself
from overheating.
Line filters, spike suppressors and hash filters are recommended for use with this
Quikstor unit, even though it contains its own spike suppression filter, and on all
computer equipment. Use of line filtering units will prevent unwanted electrical 'noise'
from entering the equipment, which could result in possible component damage.
Beware of static electricity. Computer equipment is very susceptible to static
electricity. The best prevention for static electricity is having ample humidity in the
room.
Every six months or so remove cover from the unit (turned off, of course) and blow out
dust. Other than this, no preventative maintenance is required on this unit .
Don't ever operate this or any other computer equipment when a lightning storm is in
progress, or is eminent. In case of earthquakes, floods, fire, theft and the like, I hope
you have good insurance on your equipment.