User guide

23 | P a g e
H8/H89-Z67-IDE – BOOTING FROM IDE MASTER DRIVE
If the WH-8-37 controller is the primary controller, then press the “1” key on the H8 front panel to boot
from the Master IDE drive. If the WH-8-37 is the secondary controller, then press the “2” key on the H8
front panel to boot from the Master IDE drive.
If the Z-89-67 controller is present on the H89 Computer, then by pressing the S and the 0 key will cause
to boot from the Master drive (IDE: SS-0). Also by just typing “B” (for BOOT) at the H89 command
prompt will also cause to boot from the Master IDE drive.
Figure 7: H8 CP/M boot from Master Drive (00:)