User guide

45 | P a g e
20. Install ATX-P1 Power connector (observed +5V location)
21. Install 2 pin header at the following locations; PSEN, -EA, OFF-DD/ON-SD, PARITY ENABLED, ATX
RESET AND ATX LED.
22. Install 3 pin headers at the ATX POWER LED location.
23. Install FRICTION LOCK HEADER 3 Pin Straight at the RS-232 to DB9K location.
24. Install 40 pin IC sockets
25. Install 14 pin IC sockets
26. Install 16 pin IC socket
27. Install 20 pin IC socket
28. Insert 74HCC04 IC at U1 location
29. Insert 82C55AC-2 IC at U2 location
30. Insert DS89C430 IC at U3 location
31. Insert 74LS14 IC at U4 location
32. Insert 74F04 IC at U5 location
33. Insert 8155H-2 IC at U6 location
34. Insert 74LS74 IC at U7 location