User guide

77 | P a g e
CP/M VERSIONS SUPPORTED
Heathkit CP/M OS’s:
 CP/M 2.2.03
 CP/M 2.2.04
NZCOM UTILITY ISSUES
With CP/M 2.2.03 the NZCOM utility works fine.
With CP/M 2.2.04 the NZCOM utility fails to work properly (NZCPM command hangs). Issue
resolved. See Updates for further information.
Please follow-up with Ken on this issue if using the NZCOM utility. His email is as follows;
[e-mail]
Updates:
ANY TIME the CP/M w/ZCPR2 system changes (bios modification, replacing
CCP or BDOS or resizing of the system, NZCPM.COM needs to be deleted and
MKZCM rerun. NZCPM.COM will be regenerated on the next boot of NZCOM.