Portable Media Storage User Manual
Storage Tower Preparation
Sample Installation on the tower using IDE hard drives
•
Remove the side panel screws.
• Slide the side panel towards the backside then pull or lift to open.
• To remove the front face panels, unscrew 2 screws on opposite sides
of the 5 ¼” drive bay on the tower
•
This picture shows the storage tower without both the side panels and front
faceplate.
Side panel
screw
locations
• Make sure that screws are placed for both sides of the mounting bracket
to secure the drives.
IDE Drives
Front Face Plates
IDE drives Mounting
Brackets
Screw Holes
•
After installing the hard drive, attach the side panels back to the storage
tower.
Side
panel