Blu-ray Player User Manual

3. Power ON the enclosure using the switch on the back panel. You should see
the Green Power LED on the front panel at the bottom right light up.
4. Go to Device Manager to check if your system detects the Blu Ray writer
via eSATA connection
via USB2.0 connection
5. The Blu-ray writer will also show up in My Computer.
Installing PowerDVD from CyberLink Hi-Def Suite CD
Place the CyberLink BD Drive Solution CD to the BD / DVD-ROM Drive.
Step 1. Click Install Now button.
Step 2. Select OK.
Step 3. Select Next.
Step 4. Select Yes.
Step 5. Select Next. (The CD key will automatically show up)
Step 6. Select Next.
Step 7. Select only “Cyberlink Power DVD” then click Next.
Step 8. Select Finish.
Blu-ray/ DVD-
ROM Drive
Blu-ray/DVD-
ROM Drive
Sample driver of
an eSATA host
controller
Blu-ray/ DVD-ROM
Drive
USB Driver