User guide

Installation Guide
1. System must be turned OFF. Connect the Embedded IDE-CF adapter to
the 40-pin IDE connector on the motherboard.
2. Connect the 2-Pin power connector side of the Y-type power cable to this
adapter and the other end to the PC power supply.
3. Insert a CF card or Micro Drive before the turning the system ON.
Technical Support
If you need any assistance to get your unit functioning properly, please have your
product information ready and contact Addonics Technical Support at:
Hours: 8:30 am - 6:00 pm PST
Phone: [phone]
Email: http://www.addonics.com/support/query/
v4.1.11
T E C H N O L O G I E S
User Guide
Embedded IDE-CF Adapter
(ADEBIDECF)
Drive Activity LED
IDE Connector
Master or Slave Jumper Setting
Default: Master with Jumper pin
CF Slot
2-Pin Power Connector
Motherboard