Datasheet

INTRODUCTION
The Storage Tower IV is another innovative storage enclosure solution from
Addonics that offers tremendous customization flexibility to fit practically any
storage application. Comes with four standard 5.25" drive bays, the Storage Tower
IV has a strong power supply integrated into a compact and sturdy aluminum
chassis. The four drive bays can accommodate up to four full height optical drives
or six 3.5" hard drives or a combination of these devices in various mixes. A variety
of SATA, IDE or ATAPI devices can be installed into the Storage Tower IV. The
drives can be individually interfaced to a computer via USB 3.0/2.0, eSATA, or
combined into one mini SAS connection or a Port Multiplier (PM) to form a powerful
RAID system.
www.addonics.com
Addonics Technologies Inc.
1918 Junction Avenue, San Jose, CA 95131
Phone: [phone] | Fax: [phone]
Model: ST4, ST4HPMXU, ST4PM, ST4MS, ST4SAUS, ST4ESA
Storage Tower IV
Using eSATA or the mini SAS connection, you can build yourself a high performance external storage system a terabyte
storage farm using large capacity and connect it up to 6 feet away from the computer! Any SATA devices inside the
Storage Tower can be easily converted into eSATA. Each drive can be connected directly to a eSATA host controller for
maximum throughput. For better cable management, multiple SATA devices inside the Storage Tower can be connected to
system via one cable by installing a Port Multiplier (PM) or a mini SAS bridge.
The Storage Tower with a built-in Hardware Port Multiplier is an ideal external RAID storage solution for sharing with
different computers. Once the HPM is configured, the entire RAID set can be attached to any eSATA port or USB 3.0 port
of any system. Click here for a Port Multiplier Tutorial.