User guide

www.addonics.com Technical Support (M-F 8:30am - 6:00pm PST) Phone: [phone] Email: www.addonics.com/support/query/
Installing Additional Bridge Boards on Mounting Poles
Inside the Storage Rack
Separate PM or HPM from bracket by unscrewing 4 screws on the PCB. Install
the PM or HPM onto the desired mounting pole.
Installing Bridge Boards onto Back Panel
Remove punch outs from the rear panel of the Storage Rack. Using the included
screws, attach bridge board onto the desired back panel mounting location.
Connect storage devices onto the internally mounted PM or HPM, then connect
the host connection onto the rear mounted bridge board.
I
O
I
O
Bridge BoardPM/HPMSATA Device