FCC INFORMATION FCC Compliance This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Contents 77A55017030 2 Unpacking Contents 3 Getting Started • Power On/Off • Pairing Process • Pairing to a Mobile Phone • Deleting Pairing Information • Modes 7 Using Your BluePendant • Incoming Call • Outgoing Call • Call Waiting • Voice Control • Volume Control 12 Charging • Low Battery 14 Troubleshooting 17 Additional Information 1
Unpacking Contents Your package should have: • BluePendant BP100 (Fig 1) • Power Adaptor (Fig 2) • Rechargeable Battery (Fig 3) Indicator Light Power / Volume Button (PWR / VOL ) Fig 1 : Picture of Connecting Earpiece & Mic from the BluePendant Fig 2 : Power Adaptor CALL Button Power Jack 2 Unpacking Contents Fig 3 : Rechargeable Battery
Getting Started Before the BluePendant can be used for the first time, the BluePendant battery must be charged with the supplied power adapter according to steps found in page 12 for Charging. Power ON / OFF • To Power ON, press and hold PWR/VOL button until a BEEP is heard in the BluePendant earpiece. The indicator light turns Blue for 3 seconds. Thereafter, the indicator light will either flash Blue, once every 2 seconds (when paired) or alternating Blue and Orange (when not paired).
Pairing Process Before the BluePendant can be used, it must be paired with a Bluetooth-enabled mobile phone. There is no need to pair the BluePendant again unless the pairing information has been deleted from the mobile phone. Pairing to a Mobile Phone • Delete pairing information in the BluePendant first. Refer to page 5 for deleting pairing information. • The BluePendant is ready for pairing when the indicator light alternates Blue and Orange.
• Once pairing is completed, the indicator light will flash Blue once every 2 seconds. BluePendant • The BluePendant is now in Standby mode and is ready to accept or initiate calls. PIN:12345 Bluetooth Headset Model: BP100 PASSKEY or PIN CODE Deleting Pairing Information • Once pairing information is deleted, the BluePendant resets to its default settings. • To delete pairing information, press and hold both PWR/VOL and CALL buttons until the indicator light alternates Blue and Orange.
Modes • Pairing mode - Indicator light alternating Blue and Orange - BluePendant is ready for pairing to Bluetooth-enabled phone • Standby mode - Indicator light flashes Blue once every 2 seconds - BluePendant ready to accept/initiate calls • Call mode - Indicator light shows a steady Blue - BluePendant has either accepted or initiated a call • Charging mode - Indicator light steady Orange - The BluePendant battery is being charged • Low Battery mode - Indicator light flashes Orange - 3 long beeps can be he
Using Your BluePendant Once the BluePendant is paired to the mobile phone, it can now accept or initiate calls as long as it is within range of approximately up to 10m (30ft) outdoor, or up to 5m (15ft) indoor. Incoming call Depending on the mobile phone, calls can be received through the BluePendant or through the mobile phone. Switching calls from the BluePendant to the mobile phone and vice versa is possible.
• If the BluePendant loses connection during a call, press and hold the BluePendant CALL button for 2 seconds to re-establish connection. A series of BEEPS can be heard in the BluePendant earpiece when it attempts to re-connect to the mobile phone. Outgoing call Depending on the mobile phone, calls can be received through the BluePendant or through the mobile phone. Switching calls from the BluePendant to the mobile phone and vice versa is possible.
• If the BluePendant loses connection during a call, press and hold the BluePendant CALL button for 2 seconds to re-establish connection. A series of BEEPS can be heard in the BluePendant earpiece when it attempts to re-connect to the mobile phone. Call Waiting The Call waiting function is available if the mobile phone supports it and if call waiting services has been subscribed. Please refer to the mobile phone user documentation and BluePendant Phone Operations Guide for more information.
• Press and hold the CALL button for 2 seconds and a series of BEEPs can be heard as the BluePendant attempts to connect to the mobile phone. • Once the connection is made, the BEEPs will stop and the Voice Control function can be operated in the usual way. • If the BluePendant is unable to connect to the mobile phone, a long BEEP can be heard. Please try again. Volume Control • The BluePendant volume can be increased by pressing the PWR/VOL button.
If the mobile phone supports remote volume control, the BluePendant will adjust the mobile phone volume only. If the mobile phone does not support remote volume control, the volume has to be adjusted on the BluePendant itself.
Charging Connect the power adapter only to designated power sources as marked on the power adapter. The BluePendant is powered by a rechargeable battery. It is recommended that the battery be charged with the provided power adapter. • Plug the power adapter into the BluePendant power jack. • When charging for the first time, charge for a minimum of 2 hours. • During charging, indicator light will show steady Orange until the battery is fully charged.
Low Battery • 3 long BEEPs can be heard in the earpiece when the battery power is low and requires re-charging soon. • The indicator light will flash Orange, once every 2 seconds. • The BluePendant will be automatically switched OFF after some time if it is not recharged.
Troubleshooting No sound contact between BluePendant and phone The BluePendant and the phone have to be paired to recognize each other. Please refer to the Pairing Process of the BluePendant User’s Guide on how to pair the mobile phone to the BluePendant. The BluePendant and the mobile phone also have to be within range of each other. The outdoor range is up to 10m (30ft), but solid objects or the surroundings can affect the range.
There are 2 reasons why the BluePendant might be switched off automatically: • The battery is too low. The indicator light on the BluePendant will flash Orange and 3 continuous BEEPs could be heard. • The BluePendant has been exposed to extreme temperatures. Leave the BluePendant in room temperature for a while and turn it on again. Some BluePendant functions do not work Some BluePendant functions are dependent on the mobile phone.
Changing Battery Batteries, because of their chemical nature, have a limited life span. If the operating time of the BluePendant is significantly shorter than what it usually was, it could be that the BluePendant’s re-chargeable battery is reaching the end of its limited life span. It is time to change the BluePendant’s re-chargeable battery. To change to a new battery, open the battery door and take out the old battery.
Additional Information Addvalue Consumer website: www.addvaluetech.com/consumers Before using the BluePendant, check for any exceptions, due to national requirements or limitations that may limit or prohibit usage of Bluetooth equipment. Product Usage • Do not attempt to disassemble the BluePendant. Any unauthorized alterations, modifications or disassembly of the BluePendant will automatically result in loss of product warranty. • Do not expose the BluePendant to extreme temperatures.
• Radio Frequency (RF) energy may affect some electronic systems. Most modern equipment is shielded from RF energy. However, certain electronic equipment is not. Therefore, permission is necessary when intending to use the BluePendant near or within the vicinity of medical equipment and other electronic equipment. • The BluePendant and any other electronic device connected to it operate using radio signals, hence, connection is not guaranteed under all conditions.
Limited Warranty The warranty period is twelve (12) months from the date of purchase. Save the original receipt as it is needed for warranty repair claims. Should the BluePendant need warranty service, please return it to the dealer from whom it was purchased or visit www.addvaluetech.com/consumers to get further information. This limited warranty does not apply to deterioration due to normal wear and tear.
batteries which by their nature have a limited lifetime, and breakage or damage to the connecting earpiece, microphone or lanyard) unless the defect was caused directly by defects in materials, design or workmanship. Or if the Product PIN code or serial number has been removed, erased, defaced, altered or is illegible.
BluePendant BP100 Bluetooth Technology User’s Guide
Languages Menu English 1 Deutsch 21 Français 41 Italiano 61 Español 81 101
0682 DECLARATION OF CONFORMITY We, Addvalue Communications Pte Ltd of 750D Chai Chee Road #03-03 Technopark @ Chai Chee Singapore 469004 Declare that the product, Type : Bluetooth Headset, Neckwear Model Trade Name : BluePendant Model No.
