User's Manual

Atlas IP Terminal Installation Manual
Page 16 of 34
In case of the existing mast’s flange in a vessel or ship does not fit the ADU’s mounting
base’s holes, a custom-made mechanical adaptation flange is to be designed and plate,
which acts as an interface between the existing mast and the ADU.
2.1.6 Installing ADU
The ADU is carefully unpacked and checked for any damage.
The procedure of the installing the ADU is as follow:
 Attach the coaxial cable to the RF connector (N-Type) of the ADU’s bottom
 Position the ADU to the mounting location.
 Ensure the connection of the coaxial cable and wrap it with self-adhesive tape for
water-proofing.
Cut
-
hole Dimension
for
Clearance holes for M6 ( Recommended >φ6.5mm)
Custom
-
made
mechanical adaptation
flange