User's Manual

Atlas IP Terminal Installation Manual
Page 18 of 34
 For maintenance and checking, the BDU’s location has sufficient space at its sides
and rear.
The BDU can be installed on a desktop, bulkhead, top ceiling or under captain’s console
where the wall thickness is required minimum 15mm.
The procedure of the installing the BDU is simple as follow:
 Place the BDU on the desired installation area.
 Look for the holes of the BDU’s mounting brackets.
 Fix the holes of mounting brackets with four M4x12mm self-tapping or machined
screws so that the BDU is being secured.