User's Manual

Atlas IP Terminal Installation Manual
Page 28 of 34
4.3.2 Data Connection Settings
Click on the web console.
Click Primary Profiles and set the following:
 Enable checkbox of “Set as default” and ensure “Standard” in the Profile Name.
 Enable radio button of “Standard” of Connection Type.
 Enable checkbox of “Always On (Auto PDP Context Activation)”
 Enable radio button of “Dynamic IP Address” of IP configuration.
Note:
The Standard profile is set as the default primary profile and the default connection type is standard (this is charged by the volume
[in kilobytes] of data used).
Click “Always On (Auto PDP Context Actviation)” checkbox if it is required to get the standard IP Data connection to be
reconnected automatically in the event the connection is disconnected without user intervention, i.e. antenna blockage, etc.