User's Manual

Standard Data Session is now active and
user can access the internet.
To disconnect Data Session, click on
“Disconnect”.
Open the web browser. Type
http://192.168.2.1 in the Address field.
Type in admin in Username field and admin
in Password field. Click Login.
The terminal will register to the network,
achieve GPS acquisition and satellite region.
The terminal will register to the network,
achieve GPS acquisition and satellite region.
3
2
1
Deactivating
/ Activating
a Data Session with the Web Console
Primary Handset
Unable to make outgoing call
• Ensure the terminal is set as Voice
mode.
• Ensure a correct number format is being
dialled.
• Ensure BDU LED states areas follow;
Terminal : Blinking Green
Antenna : Green
Registered : Green
Data : Off
Web Console
Unable to access Web Console
• Ensure the terminal is set as Data mode
• Ensure that there is no issue with the
Ethernet connectivity.
• Ensure that IP address is entered
correctly.
• Try to refresh the browser after
correcting the problem.
Data Connection
Unable to activate Data Session
• Ensure the terminal is set as Data mode.
• Ensure a valid APN.
• Ensure good satellite signal strength.
• Ensure PS status icon is highlighted.
• Ensure a SIM card supports PS services.
• Ensure a Prepaid Credit is not exhausted.
Unable to access internet after Data Session
is activated.
• Ensure proper PC/Laptop Ethernet
settings.
• Ensure no firewall/proxy settings are
preventing access to the BDU.
• Ensure that PC/Laptop is configured to
obtain IP address automatically (DHCP).
On the Web Console, click on the
“
Data
” icon.
1
Select
“
Connection
”.
2
Click on “Activate
Default Profile” button.
3
4
5
Select Settings>Admin>System
Operation Mode, click “Data”
and then “Update Settings”.
Accessing Web Console
Tips and Troubleshooting
4
P/N : 74B00132100
Revision 1.0