User's Manual

SABRE

™

RANGER 5000 User Guide

300K

20K

Input

Figure 13

Local Wake up input

This is a digital input. The local wakeup input is connected to pin 21 (Wake-up) of

CON801. The signal ground is connected to pin 22 (GND) of CON801. The electrical

specifications of this input are the same as the specifications of the Digital input.

Terminal Data Ready (TDR) output

This is a digital output. The TDR output is connected to pin 13 (TDR) of CON801. The

signal ground is connected to pin 1 (GND) of CON802. The electrical specifications of

this port are the same as the specifications of the Digital output.

Analogue voltage input

Use Belden cable no. 9841 or equivalent. The analogue input is connected to pin 20

(Analog-input) of CON801. This input will accept a signal of 0V to 32VDC. The analogue

signal ground is connected to pin 19 (GND) of CON801.