User's Manual

SABRE
™
RANGER 5000 User Guide
© 2017 Addvalue Innovation Pte Ltd. All rights reserved.
42
11.3.3 Security
TERMINAL PIN
Once the Terminal PIN is activated, the terminal will prompt for the password every time when you
reboot it.
Navigate to Menu > Settings > Security> Terminal PIN to enable Terminal PIN.
i. Select Enabled to enable Terminal PIN.
ii. Select Disabled if you do not need to enable Terminal to SIM.
iii. Enter the PIN number in the space provided and click Update PIN.
Figure 51
NOTE: The same password is used for the Factory Reset PIN
SIM PIN
If the security feature is enabled, a prompt requests you to enter the SIM PIN each time you power
up your SABRE
™
RANGER 5000 terminal.
This helps prevent unauthorised use of your SIM. Disable this feature to skip the PIN entry process.
Navigate to Menu > Settings > Security > SIM PIN to enable the SIM PIN.
i. Select Enabled to set the SIM PIN.
ii. Select Disabled if you do not need to set the SIM PIN.
iii. Enter the PIN number in the space provided and click Apply.
Figure 52
NOTE:
The SIM PIN depends on the SIM card. Consult your service provider if necessary.