User's Manual

SABRE

™

RANGER 5000 User Guide

Figure 62

1. Max connection is used when the user needs to receive data from different hosts

simultaneously.

By default the terminal only allows 1 connection at a time.

Max. connection 1: only one host to the specific serial port.

Max. connection 2 to 4: Terminal allows 2 to 4 TCP connections to open the serial

port simultaneously.

i. Select Enabled to enable the Periodic Reboot.

ii. Select Disabled if you do not need the feature.

iii. Enter the IP addresses with the number of retries.

iv. Enter the test intervals.

v. Click Apply for the new configuration to take effect.

Figure 63

Timeout to disconnect an idle TCP connection.

Keep the TCP connection active through sending empty packets.

Reference time to deactivate due to an idle serial connection.

Number of hosts allowed for serial port connection.