Intruder alarm system Operating Instructions ZONE 1 0 2 3 1 4 5 2 6 7 3 8 1 2 3 4 5 6 7 8 4 Power PA 5 6 7 8 9 CHIME OMIT RESET PROG SET ZONES Attack 0 1 2 3 4 5 6 7 8 9 Chime Omit Reset Prog Set PA Tamper Day TA PA Day Power Accenta G3 mini Servicing organisation details Servicing organisation (Installer) name: ____________________________________ Telephone number: _____________________________________________________ Date of installation: _________________
Operating instructions System installation Fire Zones This booklet tells you how to operate your intruder alarm system. To simplify this booklet we have assumed that the alarm system has been installed by a professional intruder alarm system installer (the installer), and that the system is operated in a “typical” way. Aspects of your system that are not “typical” will be described by your installer. One or more Zones on your alarm system may have a Fire or Smoke detector connected to it.
Accenta/Optima G3 intruder system How to set the system When you leave your premises you will need to set (or turn on) the intruder alarm system. 1. Before setting the system you should ensure that the premises have been completely vacated and that all doors and windows are closed. Ensure that pets do not have access to the protected areas as they can cause a false alarm.
Operating instructions How to Unset the system When you enter your premises you will need to unset (or turn off) the system. 1. Enter your premises by the route recommended by your installer. The system will produce an entry beep tone. Entry beeps 1 2 3 4 5 6 7 8 Power ZONES Attack Tamper Panel Day ZONE 1 2 3 5 4 Remote Keypad 2. 6 7 8 TA PA Day Power Acknowledgement beep 1 2 3 , and the Key in your code 0 entry tone will stop. The green Day indicator will light.
Accenta/Optima G3 intruder system How to part set the system If your installer has programmed your system for part set operation you will be able to set some zones of the system while others remain unset. Part set operation is often used at night time, and it will permit you to freely walk around the bedrooms while the living area and outside doors are protected. Your system may have 2 part-set programs called Program 2 and Program 3. 1.
Operating instructions How to silence an alarm If your system goes into alarm then be aware that intruders may be in the premises. Seek assistance before investigating the cause of the alarm. 1. Enter your code 0 1 2 3 . External siren 1 2 3 4 5 6 7 8 The alarm will stop, and the Zone, TA (Tamper) or PA (Attack) indicators will light to show the cause of the alarm.
Accenta/Optima G3 intruder system How To Reset After An Alarm After any alarm you will need to reset your system so that it can be used normally. Your installer may have programmed the system to be reset by you, the installer, or by Anti-code. 1. Strobe Off Reset Press the key. If the Zone, TA (Tamper) or PA (Attack) indicators all go out and the Day indicator lights then the system has been reset.
Operating instructions How to Omit zones If you cannot set the alarm system because a detector is faulty and in constant alarm you may need to omit its zone from the alarm system. A zone which has been omitted cannot cause an alarm. 1. 2. Key in your code to start the exit procedure. For more information see How to set the system or How to set program 2 or 3. Exit beeps Exit beeps Omit Press and the exit beep tone will stop, and the indicators will display all zones being used. 3.
Accenta/Optima G3 intruder system How to set up Chime Zone Chime is a low security facility for use when the system is unset. It is particularly useful in a shop to warn of customers presence, or in a house to warn when a back door has been opened. When a Chime zone detects movement the system will produce a brief two–tone sound, and the Zone indicator will light. To set any Zone to Chime: 1. The green Day indicator should be lit. 1 2 3 4 5 6 7 8 Power ZONES Attack Chime 2.
Operating instructions How to change your User code You should change your main code regularly to prevent potential intruders from knowing your 1 2 3 but this may code. All codes are 4 digits long. The factory set main code is 0 have been changed. 1. Prog Press 0 1 1 2 3 4 5 6 7 8 and now enter your code 2 3 . The TA (Tamper) indicator will light and the Day indicator will go out to indicate that you are in Programming mode. ZONES Attack Tamper Day Panel ZONE 1 3 2 4 5 Remote Keypad 2.
Accenta/Optima G3 intruder system How to change your second code Your alarm system can have a second user code. You may find it useful to set-up this second code for use by a neighbour for use when you are on holiday. The second user code operates like your user code, but it cannot be used to change or delete your code. 1. Prog Press 0 1 1 2 3 4 5 6 7 8 and enter your code 2 3 . The TA (Tamper) indicator will light and the Day indicator will go out to indicate that you are in Programming mode.
Operating instructions How to change the Duress code Your alarm system can have a duress code. The Duress code is used in a hold-up situation where there is pressure to set or unset the system. The Duress code operates like your normal code but in addition it will silently send a signal to the Alarm Receiving Centre who will inform the Police. The duress code can only be changed by the main user. Note the Duress code facility is not applicable to Optima compact G3 system. 1.
Accenta/Optima G3 intruder system How to view the event log The event log keeps a memory of the last 8 alarm events. 1. Prog 1 2 3 . Press and enter your code 0 The TA (Tamper) indicator will light and the Day indicator will go out to indicate that you are in Programming mode. 1 2 3 4 5 6 7 8 ZONES Attack Tamper Day Panel ZONE 1 2 3 4 5 Remote Keypad 2. 7 8 TA PA Day Power Power ZONES Attack Tamper Panel Day ZONE 1 2 3 4 5 Remote Keypad 4.
Operating instructions How to test your alarm system You should check that your alarm system still works correctly by periodically carrying out the alarm system tests described here. How to test the Strobe, External Siren and Internal Sounders 1. Prog Press 0 1 1 2 3 4 5 6 7 8 and enter your 4 digit user code 2 3 . The TA (Tamper) indicator will light and the Day indicator will go out to indicate that you are in Programming mode. 2. Press 0 to select alarm test mode.
Accenta/Optima G3 intruder system Walktest Press 6 to carry out a walktest. Walk around your property, and in turn cause each of the detectors to go into alarm. Also, open and close all door and windows that are protected by the system. For each detector (including door or window sensor) that is activated the system will produce a series of beeps, and the associated zone indicator will light. Press 0 to stop this test.
Operating instructions External siren Time:_____________________________ Siren delay______________________________ Area protected Zone name Program 1 Program 2 Program 3 Zone 1 Zone 2 Zone 3 Zone 4 Zone 5 Zone 6 Zone 7 Zone 8 T = Timed (Entry/Exit - Zone) TI = Time Inhibited (Access zone to keypad) I = Immediate (All zones armed to give full alarm) For Technical Support : 0906 302 0999 % This is a premium rate line, calls are charged at 50 pence per minute The panels conform to the requirements of t
