Operation Manual

Entering personal data

Body Analyser Scales BA 1300-1304

English

Entering personal data

1. Press SET.

On the display, a flashing memory cell number (1-12) will be shown.

2. Using the

or the button, select the desired memory cell.

3. Press SET.

Using the

or the button, choose your sex: for male, or for female.

4. Press SET.

On the display, the preset value for height (e.g. “165” for cm) will flash.

5. Using the

or the button, enter your height.

6. Press SET.

On the display, the preset value for age (preset: 25) will flash.

7. Using the

or the button, enter your age.

8. Finally, press SET. You have thus entered the required data.

On the display, a memory cell number will flash again and you can proceed, as

previously described, and enter the data of another person.

Or wait a few seconds until “0.0” is shown on the display and you can undertake

your body analysis.

If you do nothing else, the scales will automatically switch off after a few seconds.

 If you hold down the or the button, the forward and backward

ow of the displayed data will occur more quickly.

 Entered data can only be overwritten by making a new entry.

Body analysis

 Body analysis is only possible if your data has been entered (see

previous chapter).

 See the chapter “Weighing Tips”.

1. Briefly press SET, in order to switch the scales on.

2. Using the

or the button, select the memory cell in which you have recorded

your personal body data.

The data is briefly displayed, then “0.0” and the selected unit of measurement, e.g.

“kg”.

3. Position yourself barefoot on the scales. Remain standing still and do not hold on to

anything.

− In doing so, ensure each foot is placed on a sensor.

− There must be no contact between your feet, your legs, your calves, or your

thighs. Otherwise, the measurement will be imprecise.