User's Manual

in Ca s e o F di F F i C u l t y

If the system does not seem to be functioning:

1. Read through the manual and user guide carefully to verify proper

setup and installation of your system.

2. Make sure that your television or VCR is plugged in and turned on.

3. Make sure that the TX260 Transmitter’s power adapter is plugged in.

4. If you’ve installed the TX260 Transmitter other than on top of the

TV, make sure that its front panel is facing the receiver.

5. Make sure that the receiver has a fully charged battery.

6. Make sure Transmitter and Receiver channels are set to the same

channel.

7. If you are getting static or radio interference, change Transmitter and

Receiver to one of the other channels.

8. If you are using the TV microphone and not getting a signal, try

turning up the TV volume up slightly. Also, try positioning the TV

mic directly over the TV speaker.

9. If using RX270 with hearing aid, make sure the hearing aid has the

T-coil switch turned on.

10. If the system still does not function, call Williams Sound at:

1-800-843-3544.