User's Manual

7
st e P 1: Co n n e C t t h e tr a n s M i t t e r Po w e r su P P l y
Plug the Power Supply cord into the “DC 12V” jack 1on the back
of the TX260. Then plug the Power Supply into an AC outlet. When
the receiver is placed into the charging cradle built into the top of the
transmitter, the center charging indicator on the front of the TX260 will
turn on. When the spare battery is plugged into the left or right battery
charging port on the transmitter, the corresponding charge indicator light
will turn on.
st e P 2: Co n n e C t t h e tr a n s M i t t e r t o t h e au d i o so u r C e
Use the supplied red and white RCA audio cables to connect the TX260
Transmitter directly to the TV, VCR, or stereo “AUDIO OUT” jacks. If
your television does not have “AUDIO OUT” jacks, you will need use
the supplied TV microphone. See page 9 for TV microphone instructions.
A B C
Channel Selector
TX260 Transmitter (Rear View)
TV Microphone
If an RCA connection is unavailable,
use the provided TV microphone
to pickup the sound source directly
from the TV loud speaker as shown
on right.
n
j k l
m