User's Manual

A B C

ON OFF

st e P 2: (C o n t i n u e d )

NOTE: Some televisions have FIXED output and others have VARI-

ABLE output. If available, FIXED output should be selected. Consult

your television manual for more information. “Fixed” output means the

volume on the television will not change when the volume is increased,

decreased, or muted. “Variable” output means the volume on the televi-

sion will change when it is increased, decreased, or muted. If variable

output is the only output available on your television, we recommend

using the supplied TV microphone. See page 9 for TV microphone

instructions.

st e P 3

Channel selctor A, B, C

With the channel selector you can change the frequency of the transmit-

ter. If channel A is distorted you can change to another channel.

tr a n s M i t t e r

Note: If the transmitter is switched

to another channel, the receiver also

has to be set to the same channel. (See

specications below.)

The channel selector is located on the rear side of the transmitter or

receiver. Transmitter and receiver must both be set to the same channel.

rX260 re C e i v e r rX270 re C e i v e r