User's Manual

Pairing of sender and receiver
If you want to add an additional receiver to th sender then the new receiver
must first be paired with the sender. This is required to ensure that sender
and receiver recognize each other and that they can transmit the data
encrypted.
This is only required once for each headphone. A maximum of 4 headphones
can be paired with a sender.
If the headphone does not find a sender, then the red LED 4 blinks and no
signal will be received.
Please follow the instruction to pair the receiver with the sender:
1. Ensure that the sender is connected to an electrical outlet and that it is
provided with electricity.
2. Put the receiver on to ensure that it is switched on. For the SWING digital
LR version switch the LR receiver on.
3. Press the “Connect” button 27 briefly at the sender. The blue LED bar
starts flashing.
4. Press the “Connect” button 5 / 14 briefly at the receiver to complete the
pairing.
5. Once the paring has been completed, the sensor and the receiver
stop flashing.
English 34
3
2 4