User's Manual

Charge battery

Once the battery is fully charged, it can be used for up to 6 hours. The red

LED 4/13 starts ﬂashing once the battery is almost empty. The battery should

now be charged or exchanged. The operating time is dependent from the set

volume and from what you hear.

After use, put the receiver onto the charging bowl of the receiver without

applying pressure.

Ensure that the receiver is placed correctly. If the receiver is charged, the red

LED 18 at the left side of the receiver is illuminated. The LED 18 is illuminated

green as soon as the battery in the receiver is charged.

An additional battery can be charged in the sender. Additional batteries are

available at your specialty retailer.

The additional battery can be plugged in into the side charging bay 19.

Please ensure that the milled side points upward and that insert it without

applying too much force. If the LED 20 is illuminated red, then this battery is

charging, if the LED 20 is green then it is ready for use.

We recommend to exchange the battery in the receiver and the spare battery

in the sender weekly. This means that the batteries are used regularly and

that they achieve a maximum service life.

All batteries loose their capacity over time. This is characterized by a shorter

usage time.

English 37