User's Manual

English 31
Connect sender to the USB connector
The USB cable 33 is not included in the scope of supply. It can be purchased
from your specialty retailer. The sender has a mini USB connection.
Plug the USB cable into the “USB” connection 23 of the sender and connect
it to your computer. The switch 24 must be set to “USB”.
Connect sender to the mains supply
Connect the provided power supply with the sender through the power
supply connection “DC12V”. The power supply itself will be connected to
an electrical outlet.
Please charge the receiver with the installed battery for 6 hours before
commissioning the device for the first time.
DC 12V
USB AUDIO
MIC
CONNECT
USB
AUDIO
MIC
USB
DC 12V
USBAUDIO
MIC
CONNECT
USB
AUDIO
MIC
33
23
24