5DOF Robotic Arm Kit for Ardunio Uno R3 - Tutorial
Table Of Contents
- Contents
- Components List
- Introduction of Robotic Arm
- Introduction of Adeept Arm Drive Board
- Lesson 0 Building the Arduino Development Environm
- 1.Arduino development language
- 2.Arduino program structure
- 3. The construction of the Arduino development env
- 4. Introduction of Arduino software interface
- 5.Connecting the Adeept Arm Drive Board and the co
- 6.The solution for situation that Arduino IDE cann
- 7、
- 8. Configuring the "libraries" folder of the Ardui
- Lesson 1 How to Read the Data of the Potentiometer
- Lesson 2 Controlling the Servo
- Lesson 3 Displaying Text on the OLED Screen
- Lesson 4 Saving Data with EEPROM
- Lesson 5 Servo 90 degree adjustment
- Lesson 6 How to Assemble the Robotic Arm
- Lesson 7 GUI application control mode
- Lesson 8 GwBlock graphical control mode
- Lesson 9 Potentiometer control mode
- Lesson 10 Learning mode
- Lesson 11 Processing controls robotic arm
- Lesson 12 Imitation function(Pen)
- Lesson 13 Processing controls robotic arm to write
127
【2】Python: Click this button to display the edited graphical code block in the form
of Python code.
【 3 】 Connecting device: Click this button to connect to the Arduino development
board, which requires you to enter the IP address.
【
4
】 ：
(1) is the cancel button.Click it to return to the state of the previous operation
(cancel this operation).
(2) is the forward button.Click it to advance to the state of the next operation.
(3) is the button to run the program. Click it to run the correct program we
have compiled.
【5】 is a drop-down menu button:
Under the drop-down menu button, you can "Import project file" and "Save
project file". In addition,by the drop-down button on the right of UNO R3, you can
switch to the programming mode of different controllers.We are using Arduino UNO
R3 version of the development board in the current course, so we choose UNO R3
mode to programmatically control Arduino.
You can also switch the language display mode of the editor by the drop-down