Tutorial

www.adeept.com
12
Next we need to install the driver program of the Adeept Robotic Arm Drive Board. We provide
driver programs for 4 systems, Windows, Android, Linux and Mac in the package. We need to
select the corresponding driver installation according to the system. Let's take the Windows
system as an example. Firstly connect Adeept Robotic Arm Drive Board to the computer with a
USB cable. Then open the package, find out the CH341SER_Windows.exe application, and run the
program.
The following interface appears, click "INSTALL"
Wait a few minutes for the driver to be installed, and then open the Device Manager of the
computer and you will see that the computer has recognized the Adeept Robotic Arm Drive
Board, and the Adeept Robotic Arm Drive Board port number is COM7. It may be recognized
differently on different computers for example COM1, COM2, COM3 and so on.