Starter Guide

www.adeept.com
- 6 -
Introduction of AdeeptV3.0 expansion board.
Our microbit 3.0 expansion board isas follow:
There is no difference from the previous version of the appearance, but we
added a 5V power supply port on this expansion board. Many customers
report the problems of insufficient power supply, such as dim LCD 1602
display, insensitive servo, and difficult-to-start motor. By charging these
devices with 5V, the problems will be solved.
Note: If is powered with the power supply wire of micro:bit, the power
supply port on the expansion board is still 3.3V. We need to plug the data
cable into the power supply port of the expansion board. Switch on, only
then will the voltage of the 5V power supply port be 5V.