Tutorial
Table Of Contents
- 1. Premise
- 2. Raspberry Pi System Installation and Developmen
- 3 Log In to The Raspberry Pi and Install The App
- 4 Assembly and Precautions
- 5 Controlling Robot via WEB App
- 6 Common Problems and Solutions(Q&A)
- 7 Set The Program to Start Automatically
- 8 Remote Operation of Raspberry Pi Via MobaXterm
- 9 How to Control WS2812 RGB LED
- 10 How to Control The Servo
- 11 How to Control DC Motor
- 12 Ultrasonic Module
- 13 Line Tracking
- 14 Make A Police Light or Breathing Light
- 15 Real-Time Video Transmission
- 16 Automatic Obstacle Avoidance
- 17 Why OpenCV Uses Multi-threading to Process Vide
- 18 OpenCV Learn to Use OpenCV
- 19 Using OpenCV to Realize Color Recognition and T
- 20 Machine Line Tracking Based on OpenCV
- 21 Create A WiFi Hotspot on The Raspberry Pi
- 22 Install GUI Dependent Item under Window
- 23 How to Use GUI
- 24 Control The WS2812 LED via GUI
- 25 Real-time Video Transmission Based on OpenCV
- 26 Use OpenCV to Process Video Frames on The PC
- 27 Enable UART
- 28 Control Your AWR with An Android Device
- Conclusion
95
"""Invoked from each client's thread after a frame was processed."""
self.events[get_ident()][0].clear()
class BaseCamera(object):
thread = None # background thread that reads frames from camera
frame = None # current frame is stored here by background thread
last_access = 0 # time of last client access to the camera
event = CameraEvent()
def __init__(self):
"""Start the background camera thread if it isn't running yet."""
if BaseCamera.thread is None:
BaseCamera.last_access = time.time()
# start background frame thread
BaseCamera.thread = threading.Thread(target=self._thread)
BaseCamera.thread.start()
# wait until frames are available
while self.get_frame() is None:
time.sleep(0)
def get_frame(self):
"""Return the current camera frame."""
BaseCamera.last_access = time.time()
# wait for a signal from the camera thread
BaseCamera.event.wait()
BaseCamera.event.clear()
return BaseCamera.frame
@staticmethod
def frames():
""""Generator that returns frames from the camera."""
raise RuntimeError('Must be implemented by subclasses.')
@classmethod
def _thread(cls):
"""Camera background thread."""
print('Starting camera thread.')
frames_iterator = cls.frames()