User Manual

9
6. Write the image file `Raspbian` downloaded to the SD card with `Raspberry Pi Imager`
7. Leave the SD card connected after writing is completed, we'll use for configuring SSH and WiFi
connection later.
Detailed Steps:
●Open a web browser on your computer, go to the Raspberry Pi website [Official Raspberry Pi website],
find and download the Raspberry Pi Imager for your computer OS, or click on the links above for the
corresponding system to directly download and install.
●Insert the SD card into the card reader, connect the card reader and your computer.
●Run the Raspberry Pi Imager, select CHOOSE OS, and then Use custom to find the .img extracted, click
Open.
●Select CHOOSE SD CARD for the SD card to write the Raspbian, please be noted that the image writing
●
Go to
our [offic
ial webs
ite], find
and dow
nload the
image
file [Ima
ge file f
or the
Adeept_R
aspClaws
Robot]. Un
zip the file,
be noted
that the pa
th should
be in Engli
sh for the
.img file
extracte
d, no spe
cial charac
ters allow
ed. otherw
ise Raspb
erry Pi Im
ager may
not open
the .img
file. It's
recomm
ended to s
ave the .im
g file to the
root direct
ory of the C
:\ or D:\ di
sk, but do n
ot save .im
g on the S
D card.
- [Image file for the
Adeept_RaspClaws Robot]
5. Unzip the file, be noted that the path should be in English for the `.img` file extracted, no special
characters allowed.
3. Install the `Raspberry Pi
Imager`
4. Download the image file
`Adeept_RaspClaws`