User Manual

ManualsBrandsAdeept ManualsComputers & AccessoriesRaspClaws Hexapod Spider Robot Kit for Raspberry Pi 4 3 Model B+/B, STEAM Crawling Robot, OpenCV Target Tracking, Video Transmission, Raspberry Pi Robot with PDF Manual

Table Of Contents

1. Premise
- 1.1STEAM and Raspberry Pi
- 1.2About the Documentation
2. Raspberry Pi System Installation and Developmen
- 2.1 Install An Operating System for The Raspberry
- 2.2 Enable SSH Server of Raspberry Pi
  - 2.2.1 Method A: Enable SSH with Peripherals
  - 2.2.2 Method A: Enable SSH without Peripherals
- 2.3 Configure WiFi on Raspberry Pi
  - 2.3.1 Method A: WiFi Connection with Peripherals
  - 2.3.2 Method A: WiFi Connection without Periphera
3 Log In to The Raspberry Pi and Install The App
- 3.1 Log into Raspberry Pi (Windows 10)
- 3.2 Log into Raspberry Pi (Linux or Mac OS)
- 3.3 Log into Raspberry Pi (Windows 8 or Previous V
- 3.4 Download Program of The Raspberry Pi Robot
- 3.5 Install Corresponding Dependent Libraries
- 3.6 Run the Raspberry Pi Robot's Program
4 Raspberry Pi Structure Assembly and Precautions
- 4.1 Documentation for Structure Assembly
- 4.2 Tips for Structural Assemblage
- 4.3 Tips for Power Provision
5 Controlling A Robot via WEB App
6 Common Problems and Solutions(Q&A)
7 Set The Program to Start Automatically
- 7.1 Set The Specified Program to Run Automatically
- 7.2 Change The Program That Starts Automatically
8 Remote Operation of Raspberry Pi Via MobaXterm
9 How to Control WS2812 RGB LED
10 How to Control The Servo
- 10.1 Control The Steering Gear to Rotate to A Cert
- 10.2 Control The Slow Motion of The Steering Gear
- 10.3 Non-blocking Control
11 Calling the API to Control the Robot
12 Automatic Stabilization Function
13 Gait Generation Method of A Hexapod Robot
14 Make A Police Light or Breathing Light
- 14.1 Multi-threading Introduction
- 14.2 Realization of Police Lights / Breathing Ligh
- 14.3 Warning Lights or Breathing Lights in Other P
15 Real-Time Video Transmission
16 Why OpenCV Uses Multi-threading to Process Vide
- 16.1 Single Thread Processing of Video Frames
- 16.2 Multi-thread Processing of Video Frames
17 OpenCV Learn to Use OpenCV
18 Using OpenCV to Realize Color Recognition and T
- 18.1 Color Recognition and Color Space
- 18.2 Process of Color Identifying and Tracking
- 18.3 Specific Code
- 18.4 HSV Color Component Range in OpenCV
19 Machine Line Tracking Based on OpenCV
- 19.1 Visual Line Inspection Process
- 19.2 Specific Code
20 Create A WiFi Hotspot on The Raspberry Pi
21 Install GUI Dependent Item under Window
- 21.1 Install GUI Dependencies
22 How to Use GUI
23 Enable UART
- 23.1 Mini UART and CPU Core Frequency
- 23.2 Disabling Linux's Use of Console UART
- 23.3 UART Output on GPIO Pins
- 23.4 UARTs and Device Tree
- 23.5 Relevant Differences Between PL011 and Mini U
24 Control Your Adeept_RaspClaws with An Android D
Conclusion

will automatically delete all files on the SD card if any.

●Click on WRITE, wait for the writing.

●Do not remove the SD card connected after writing is completed, we'll use for configuring WiFi connection

later. Otherwise, if you remove the card, insert it into the Raspberry Pi and boot it up, WiFi configuration without

any peripherals may fail in the following process.

2.2 Enable SSH Server of Raspberry Pi

●By SSH (Secure Shell) server, you can use the command line of Raspberry Pi remotely on

another device. In the subsequent operation and when using the Raspberry Pi, you don't have to

connect a mouse, keyboard, or monitor to it, but simply control it on a computer in the same LAN.

●As of the November 2016 release, Raspbian has the SSH server disabled by default. You

will have to enable it manually.

●The method to enable the SSH in this documentation can be referred to the Raspberry Pi

official website SSH(Secure Shell)