Tutorial

When entering the password, the password or * will not displayed on the screen,
but it does not mean that the password was not entered successfully. After entering,
press Enter to log in to the Raspberry Pi.
This session is saved in the left column (Fig. ② below). The next time you connect
the Raspberry Pi, just double-click here to connect the Raspberry Pi again. (Note: If
the IP address of Raspberry Pi changes, you need to start a new session from
scratch.)
After the account and password are entered correctly, a window will pop up asking
if you want to save the account and password. In order to facilitate the next login
you can choose Yes.
At the same time, the left column will be replaced with a file transfer system (see Fig.
① below). This window can be used to conveniently interact with files in the
Raspberry Pi system. If you want to return to the session selection, just click
Sessions on the tab on the left column (Fig. ② below).