User`s manual

SUMMARY OF
DEFAULT
CONSEQUENCES
Low Speed (’94’80)
Loading “ttik default doee the following:
.
.
.
Selecte low epeed, etandard fo~mat with no checkeum, tor Botn pnone
numbere.
Assigns the following report codes:
.-.
03 for zones 3-47,56-61,64
Olforzonesl,2& 46-55 (fire zones)
02 for zones 62,= (panic trans), & 95,96,99 (keypad panics)
09 for all alarm restores
Enables all zone type restores.
ADEMCO Express ~94*81)
Loading this default does the following:
. Selects Ademco express raporfing format, wilhchecksum, for both phone
numbers.
. ReWticodes for sensor zones l-64 andsystem zones 70-99 aresent as their
respective zone lDnumbers (01-99), Duress issentas''DW. Alarm restore is”E
+ 2nd digit,
. Enables allzone type restores.
ADEMCO High Speed ~94*82)
Loading this default does the following:
● Selects Ademco Hioh SDeed format. with no checksum, for both phone
-,
numbers.
.
Repofling is aseigned to the following channels:
Channel 1 for zones 1,2& 48-55 (Rre zones)
Channel 2 for zones 3-8
Channel 3 for zones 9-16
Channel 4 for zones 17-31
Channel 5 for zones 32-47
Channel 6 for zones 56-61 & W
Channel 9 for zones 62 & ~
Channel 7 for system zones 70-77&97
Channel 8 not used
Channels 10, 11 & 12 for keypad panics 95,96&99 respectively
.
Enables all zone type restores.
.
Enables Duress to be sent.
ADEMCO’S Contact ID ~94*83)
Loa@ng this default does the following:
. Selects Contact ID format for both phone numbers.
.
Reporting is en2bled for all zones.
.
Enables all zone type restores,
.
Refer to the SYSTEM COMMUNICATION section for event code definitions.
.,
–48-