Operating instructions

1. Input Connector Recess
2. Input Video BNC (and Y/C) and PC Connectors
3. Speakers
4. Mounting Keyholes
5. Threaded Mounting Socket
Recessed wiring location for all cables. Connect the plug from the supplied
table-top power supply into the 12 VDC connector. Input at the monitor is 12
volts DC from the TT universal AC supply (100-240 VAC, see specifications
table for AC/DC details).
Attach the video cable from a camera, VCR, or other source here. Either left or
right, BNC or Y/C socket, can be input or output. The connector have auto-
termination switches inside. See Connections, below.
Audio inputs are high impedance using RCA jack connections, left (white) and
right (red). Inserting only a single plug will make a connection to both speakers
(dual monaural).
You may hang monitors on a wall using screw or nail heads. The heads
should not enter the monitor deeper than / " (6 mm).
The threaded sockets are hardpoints for mounting the monitor. You may
mount it in any orientation. The screws must not insert deeper than / "
(6 mm). The threads are 10-32 UNC.
1
4
1
4
Typical Color LCD Video Monitor Back
1
2
3
4
5
6
Figure 3 - Rear panel connectors
11AMC15LCD
15-Inch Color Monitor