Operating instructions

adjusts the sharpness of the picture.
adjusts all the colors on the screen, but is most noticeable to the eye in reds
and yellows, and is also usually set for pleasing facial tones.
(Appears in NTSC mode only).
sets the OSD language of the menu to English.
sets the OSD language of the menu to German.
sets the OSD language of the menu to French.
sets the OSD language of the menu to Italian.
sets the OSD language of the menu to Spanish.
sets the OSD language of the menu to Polish.
Sharpness
Tint
Language: English
Deutsch
Fran ais
Italiano
Espa ol
Polski
Motion Mode
Tip:
Under Scan
Input
Filter
AFC
DVCO
Tip :
Recall
Hot Keys
changes the scanning method of the LCD monitor.
There are three methods which can be controlled.
(Still/Progressive/Motion)
and modes are progressive scan but is
better than for moving images and is better than
for still images. uses interlace scan.
adjusts the image size.
selects between the composite (BNC) or Y/C (4 pin S-video) inputs for the
display.
adjusts Filter "ON" to reduce the output video noise.
(auto frequency control) is used to adjust for the skew distortion of a video
signal from a recorder (or other equipment).
The options are : and
is used to reduce unwanted moving vertical lines.
In some case, vertical lines flowing to the right or left appear
depending on the video source.
When flowing vertical lines appear, it is convenient to reduce them by
adjusting the
sets the monitor to the original factory settings.
Without pushing the menu button, the left( , ) and right pairs
( , ) of buttons function as direct access buttons (Hot keys).
The left pair adjusts , and the right pair adjusts
Still Progressive Progressive
Still Still Progressive
Motion
However, use Toggle mode when the video source contains
moving images. (For example, DVD or VCR)
NORMAL, SLOW, FAST.
DVCO.
Brightness Volume.
14 AMC15LCD
15-Inch Color Monitor