User guide

– 10 –
QUICK VIEW OF SYSTEM FUNCTIONS
QUICK VIEW OF SYSTEM FUNCTIONSQUICK VIEW OF SYSTEM FUNCTIONS
QUICK VIEW OF SYSTEM FUNCTIONS
REMOTE PHONE CONTROL OPERATION
To remotely disarm: --------------------- + [1]
To remotely arm in AWAY mode: - + [2]
To remotely arm in STAY mode: -- + [3]
To remotely arm in AWAY or STAY mode with NO DELAY: + [2] or [3] + [0]
To remotely activate X10 devices 1-6: ---------- [#] + [4] + device no.
To remotely activate X10 devices 7 & 8: ------ + [#] + [4] + device no.
To remotely deactivate X10 devices 1-6: ------ [#] + [7] + device no.
To remotely deactivate X10 devices 7 & 8: + [#] + [7] + device no.
To remotely bypass a zone: ---------- + [6] + zone no.
To remotely activate forced bypass: ------------ + [6] + [#]*
To remotely check system status: - [*]
To hang up: ---------------------------------- + [9]
*If forced bypass was enabled by your installer.
OTHER FUNCTIONS
To set the time and date: -------------- + FUNCTION + [63]
To set scheduling: ------------------------ + FUNCTION + [64]
To activate X10 devices 1-6: --------- FUNCTION + LIGHTS ON + device number
To activate X10 devices 7 & 8: ------ +FUNCTION +LIGHTS ON + device number
To deactivate X10 devices 1-6: ----- FUNCTION + LIGHTS OFF + device number
To deactivate X10 dev. 7 & 8: -------- +FUNCTION +LIGHTS OFF + device number
To add a user code: ---------------------
**
+ CODE + user no. (02-08)+ user code
To delete a user code (except Master Code):
**
+ CODE + user number (02-08)
To turn Test mode on: ------------------ + TEST
To turn Test mode off: ----------------- + OFF
To use the defined AUX function: - Press and hold AUX key 2 seconds (4 beeps) +
To send message to pager: ------------ Press and hold AUX key 2 seconds (4 beeps)
To program “Follow Me” reminder phone #: +FUNCTION + [65] + Enter up to 24
digits
To delete “Follow Me” reminder phone #: + FUNCTION + [65]
** Only the master code can be used to add or delete another user code.