User`s guide

– 21 –
ARMING ALL PROTECTION
With Entry Delay OFF
Using the 4 MAXIMUM Key
BEFORE ARMING, make sure all non-main doors and windows are closed.
Refer to CHECKING FOR OPEN ZONES on page 14.
Use this key when the premises will be vacant for extended periods
of time, such as during vacations, or when you are retiring for the night and
no one will be moving through protected interior areas.
1. Enter your security code and press the MAXIMUM (MAX) key.
2. The keypad will beep twice and display the armed “MAXIMUM” message.
The red ARMED indicator will light.
3. You may leave through an entry/exit door during the exit delay period
without causing an alarm.
After the exit delay expires, the system arms. It will sound an alarm
immediately if any protected door or window is opened, or if any movement is
detected inside your premises.
An alarm will sound immediately when someone re-enters.
THE MAXIMUM KEY ARMS THE ENTIRE SYSTEM (INCLUDING THE
ENTRY/EXIT ZONE WITH NO ENTRY DELAY).
TYPICAL DISPLAYS - "ARMED MAXIMUM"
AWAY
INSTANT
AC
✴ ✴
FIXED WORD ALPHA
The message “YOU MAY EXIT NOW” changes to "ALL SECURE" when the
exit delay expires.
NOTE:
Failure to close an open exit route zone before the exit delay time ends
may result in that zone being automatically bypassed at that time.