User guide

– 16 –

ARMING ALL PROTECTION

(With Entry Delay ON)

Using the

AWAY Key

Use this key when no one will be staying on the premises.

When armed in AWAY mode, the system will sound an alarm if a

protected door or window is opened, or if any movement is

detected inside the premises. You may leave through the

entrance door during the exit delay period without causing an

alarm. You may also reenter through the entrance door, but must

disarm the system within the entry delay period or an alarm will

occur.

Close all perimeter windows and doors before arming (see

CHECKING FOR OPEN ZONES section)

AWAY

1. Enter your security code and press 2 .

ARMED **AWAY**

YOU MAY EXIT NOW

The keypad will beep twice and will display

the armed message.

Note: The "YOU MAY EXIT NOW" portion

of the message disappears when exit

delay expires.

NOTE: Failure to close an open exit route zone before the exit

delay time ends may result in that zone being automatically

bypassed or in alarm, as a function of how your system was

programmed by the installer. Consult your installer for the

configuration of your system.