User guide

– 31 –
SECURITY CODES
& AUTHORITY LEVELS
To Change a
User's Code
CODE
1. Enter Master or Manager code and press the 8 key + user
number to be changed.
2. Enter the new code for that user.
ADD NEW USER?
0 = NO , 1 = YES
The system will recognize that the user
number is already in use and will prompt
whether or not this is a new user. Enter 0 to
change the existing user's code to the code
entered in step 3.
USER 002 CHANGED
SUCCESSFULLY
The system will confirm that the change is
allowed based on authorization level, and
if so, will put the new code into effect.
Note that if changing one’s own
code, the system will prompt for the new
code to be reentered. This prevents
accidentally changing one's own code.
To Delete a User
CODE
1. Enter Master or Manager code and press the 8 key + User
Number to be deleted.
2. Enter Master or Manager code first entered.
OK TO DELETE
0 = NO , 1 = YES
The system will recognize that the User
number is already in use and will prompt to
confirm that it should be deleted. Press 0
(NO) or 1 (YES).
USER CODE
DELETED
If yes, that user's code will be removed from
all partitions to which it was assigned, and all
authorization levels and other information
about that user will be deleted. Note that a
user can only be deleted from the partition in
which it was first assigned, and can only be
deleted by a user with a higher authority
level. A User's security code cannot be
deleted by oneself.