User guide

– 38 –
USING SCHEDULES
Programming
Temporary
Schedules
Temporary schedules only affect the partition from which it is
entered. Temporary schedules can be reused at later dates
simply by scrolling (by pressing #) to the DAYS? prompt
(described below) and activating the appropriate days. This
should be considered when defining daily time windows. Note
that only users with authority level of manager or higher can
program temporary schedules.
To program temporary schedules:
1. Enter your security code.
2. Press the #
key followed by 81.
3. The following prompts will appear.
MON DISARM WIND.
07:45AM 08:45AM
The cursor will be positioned on the tens
of hours digit of the start time for
Monday's disarm window. Enter the
desired hour. Press * to move to the
minutes field. The minutes are entered
in the same manner. The AM/PM
indication is changed by hitting any key,
0-9, while the cursor is under the letter
A/P position. Repeat for the stop time
entry. Press the * key to move to the
arming window for Monday.
Press # to move to the next screen
display without making changes.
MON ARM WINDOW
07:45AM 08:45AM
The cursor will be positioned on the tens
of hours digit of the start time for the arm
window. Repeat the previous steps to
enter the start and stop time for Monday's
arming window.