User guide

– 40 –
PROGRAMMING DEVICE TIMERS
General
Information
Device timers consist of an ON time & an OFF time, and selected
days of the week in which they are active. There are up to 20
timers that can be used to control various devices, such as lights
or appliances. Your installer will have programmed the
appropriate devices into the system (up to 16 devices can be
programmed).
Each timer controls a single device (designated as an output
number) that you select. For example, timer 1 might be set to turn
the porch lights on at 7:00pm and turn them off at 11:00pm. Timer
2 might turn on the air conditioner Monday-Friday at 4:30pm to
cool the premises before you arrive at 5:00pm, and turn it off at
10:00pm when you are retiring for the night. If desired, different
timers can control the same device. For example, timer 2 could be
used Monday-Friday as in the previous example, and timer 3
could be set to turn the air conditioner on and off at different times
Saturday and Sunday.
To enter the device timer menu mode:
Enter your security code, then press the #
key followed by 83.
OUTPUT TIMER # ?
01-20,00=QUIT 01
Up to 20 timers can be programmed. Each
timer is identified by a number 1-20. Enter
the desired timer number to be programmed
(1-20). Press * to accept entry.
06 07:00P 11:45P
PORCH LITE 04
If that timer number has already been
programmed, a summary screen will appear.
In this example:
06 = Timer #
04 = Output Device # affected by this timer
PORCH LITE = Output Descriptor for Device 4
07:00PM = Start Time;
11:45PM = Stop Time
Press * to continue.
See your installer for
device numbers.
00 ENTER OUTPUT#
00
Enter the desired output device number (1-
16). As the number is entered, the device's
description will appear.
To delete a previously programmed timer,
enter 00 as the output number.