Setup guide

xi
Program feature or option Permitted in
UL864? Y/N
Possible settings
Settings permitted in UL 864
1✱
30 RF RECEIVER
SUPERVISION CHECK-
IN INTERVAL
N
Enter 02–15 times 2 hours (4–
30 hours)
Enter 00 to disable receiver
supervision
Maximum is 02 (4 hours) for
fire installations.
1✱
31 RF TRANSMITTER
CHECK-IN INTERVAL
N
Enter 02–15 times 2 hours (4–
30 hours)
Enter 00 to disable
transmitter supervision
Maximum is 02 (4 hours) for
fire installations.
1✱
35 ACCESS CONTROL
DIALER ENABLES
N 0 = disable
1 = enable
Not used. Must be set to “0”.
1✱
44 WIRELESS
KEYPAD TAMPER
DETECT
N 0 = disable
1 = enable
Not used. Must be set to “0”.
1✱
45 EXIT DELAY
SOUNDING (PARTITION
SPECIFIC)
N
0 = disable
1 = enable
Must be set to “0” (disable)
for partition 1.
1✱
48 WIRELESS
KEYPAD ASSIGNMENT
N 0 = none
1-8 = partition number
Not used. Must be set to “0”.
1✱
49 SUPPRESS TX
SUPERVISION SOUND
N
0 = disable
1 = enable
Must be set to “0” (disable).
1✱
53 DISABLE
DOWNLOAD CALLBACK
N
0 = callback required
1 = no callback required
Must be set to “0” (callback
required).
1✱
57 5800 RF BUTTON
GLOBAL ARM
N
0 = disable
1 = enable
Must be set to “0” (disable).
1✱
58 5800 RF BUTTON
FORCE ARM
N
0 = disable
1 = enable
Must be set to “0” (disable).
1✱
60 ZONE 5 AUDIO
ALARM VERIFICATION
N
0 = disable
1 = enable
Must be set to “0” (disable).
1✱
69 PRINTER TYPE
N 0 = parallel printer
1 = serial printer
Not used.
1✱
72 EVENT LOG
PRINTER ONLINE
N 0 = disable
1 = enable
Not used. Must be set to “0”.
1✱
73 PRINTER BAUD
RATE
N 0 = 1200
1 = 300
Not used.
1✱
76 CONTROL RELAY
(PART-SPECIFIC)
N
01-96 = relay number
00 = relay not used.
Must be set to “00” (relay not
used) for partition 1.
1✱
78 EXTENDED HOME
CONT EVENTS
N 1 = extended
0 = limited
Not used. Must be set to “0”.
1✱
79 HOME CONTROL
EVENTS
N 0 = disable
1 = enable
Not used. Must be set to “0”
in each entry.
2✱
07 AUTO-DISARM
DELAY (PART
SPECIFIC)
N
00 = no delay.
01-14 times 4 minutes (04-56)
delay.
15 = no auto disarming.
Must be set to “15” (no auto
disarming) for partition 1.
2✱
18 ENABLE GOTO
FOR THIS PARTITION
(partition-specific)
N
0 = disable
1 = enable
Must be set to “0” (disable)
for partition 1.