User guide

– 61 –
Trouble Conditions (cont’d)
• A display of "COMM. FAILURE" at the Keypad indicates that a failure
has occurred in the telephone communication portion of your system.
CALL FOR SERVICE IMMEDIATELY.
• A display of "SYSTEM LO BAT", accompanied by a once per minute
"beeping" at the Keypad indicates that a low system battery condition
exists. CALL FOR SERVICE IMMEDIATELY.
• A display of "LO BAT" and a zone descriptor, accompanied by a once per
minute "beeping" at the Keypad indicates that a low battery condition
exists in the wireless transmitter displayed. CALL FOR SERVICE
IMMEDIATELY.
• A display of "MODEM COMM" indicates that the control is on-line with
the central station's remote computer. The control will not operate while
on-line.
• A display of “HSENS” and a zone number indicates a smoke detector
with a high sensitivity level, which may cause false alarms. CALL FOR
SERVICE IMMEDIATELY.
• A display of “LSENS” and a zone number indicates a smoke detector
with a low sensitivity level. Detectors with a low sensitivity might not
detect a smoke condition. CALL FOR SERVICE IMMEDIATELY.
Power Failure
If the message "AC LOSS" is displayed, the Keypad is operating on battery
power only. If only some lights are out on the premises, check circuit
breakers and fuses and reset or replace as necessary. CALL FOR SERVICE
IMMEDIATELY if AC power cannot be restored.
SERVICING INFORMATION
Your local HONEYWELL dealer is the person best qualified to service your
alarm system. Arranging some kind of regular service program with him is
advisable. Your local HONEYWELL dealer is:
Name:
Address:
Phone: