User Guide

Using Schedules (cont’d)
– 45 –
Press # to move to the next screen display
without making changes.
MON ARM WINDOW
07:45AM 08:45AM
The cursor will be positioned on the tens of
hours digit of the start time for the arm
window. Repeat the previous steps to enter
the start and stop time for Monday's arming
window.
TUE DISARM WIND.
07:45AM 08:45AM
After the windows for that day have been
completed, the system will prompt for
disarm and arm time windows for the next
day. Repeat the procedure for all days of the
week.
When all of the days have been completed,
the system will ask which days are to be
activated.
DAYS ? MTWTFSS
HIT 0-7 X X
This is the prompt that actually activates
the temporary schedule, and allows the
temporary schedule to be customized to a
particular week's needs. To select the days
which are to be activated, enter the desired
number 1-7 (Monday = 1). An "X" will
appear under that day, indicating the
previously entered schedule for that day is
active. Entering a day's number again will
deactivate that day. Pressing 0 will turn all
days on/off.
The temporary schedule will only be in effect
for the days which have the letter x
underneath them. As the week progresses,
the days are reset to the deactive state.
When completed, press * to exit the
temporary schedule entry mode.