Instructions / Assembly

21 Penn Plaza Suite 909 New York, NY 10001
Tel: [phone] Fax: [phone]
www.adessohome.com
Assembly Instructions (English)
IMPORTANT SAFETY INSTRUCTIONS:
This portable lamp has a polarized plug (one
blade is wider than the other) as a feature to
reduce the risk of electric shock. This plug will fit
in a polarized outlet only one way. If the plug does
not fit fully in the outlet, reverse the plug. If it still
does not fit, contact a qualified electrician. Never
use with an extension cord unless plug can be
fully inserted. DO NOT ALTER THE PLUG.
GENERAL PRODUCT INFORMATION:
This product is suitable
for dry locations only.
BULB TYPE: (1) 60 watt incandescent or 13 watt
CFL equivalant. (not included)
ASSEMBLY INSTRUCTIONS FOR
Jerey Wall Lamp
Model # 3406-21
1.03406-21
1. Remove all items from packaging. Drill 2 light
holes in the wall and then nail the plastic bolts (F)
into wall.
Note : Take o the mounting plate (E) from lamp
assembly (C) and then place onto the wall. Use the
mounting plate (E) to get the spacing for the holes
correct on the item before marking the walls and
drilling.
2. Align holes in mounting plate (E) with holes in
plastic bolts (F) and attach with 2 screws (D).
Secure screws (D) with a phillips head screwdriver.
3. Push lamp assembly (C) over the mounting plate (E)
until it is flush with the wall. Align holes in lamp
assembly (C) with holes in mounting plate (E) and
secure with 2 screws (G).
4. Set shade (B) on lamp socket and tighten clockwise
with socket ring (A) to secure shade.
1.
2.
3. 4.
(2) plastic bolts
(2) screws
PARTS DIAGRAM: