ARF37 Wireless Audio Conference System 915MHz version User Guide
About this Document This guide describes the ARF37 devices, their options and accessories. It explains how to set the features to enable a conference communication between several devices. No part of this document may be reproduced or transmitted (in electronic or paper version, photocopy) without Adeunis RF consent. This document is subject to change without notice. All trademarks mentioned in this guide are the property of their respective owner.
ARF37 User Guide Table of Contents About this Document............................................................. 2 Table of Contents .................................................................. 1 Declaration of Conformity ..................................................... 2 Download of the user guide ........................................... 2 Compliance to FCC US/CAN................................................... 3 Introducing the ARF37...................................................
ARF37 User Guide Declaration of Conformity Manufacturer’s name : Manufacturer’s address : Country: Authorised representative in Australia: Address : Country: ADEUNIS R.F. Parc Technologique PRE ROUX IV 283 rue Louis NEEL 38920 CROLLES FRANCE L & W Sports Communications PTY LTD. Mark Langlands City: 29 Lynanda Court 4510 CABOOLTURE Q AUSTRALIA certify and declare under our sole responsibility that the following apparatus: Description: ARF37 Digital Hopping Audio Communication System in 915928MHz band.
ARF37 User Guide Compliance to FCC US/CAN This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
ARF37 User Guide Introducing the ARF37 The ARF37 allows you to establish a conference communication, using up to 6 wireless devices in a team. Having set the conference parameters, you can use the devices, speak and hear the other users. Product Description The ARF37 devices are delivered with the following options : Audio conference devices with a 3.
ARF37 User Guide Accessories To complete the communication system, the following accessories are available : Standard headset kit with waterproof locking connector Ref. 7382-A – M32 Customized headset kit with waterproof locking connector Ref. 7382-A – M33 Belt Ref. CEINTURE 110 Harness Armband Ref. 915MHz - 08-10-V2-psn Ref. 7382-A - MØ9 Ref.
ARF37 User Guide 3.7 V 1000 mA/h battery Ref. EASYPACK 1000 3.7 V 2000 mA/h battery Ref. EASYPACK 2000 5-slot battery rack for reloading the batteries Ref. ARF7418A Clip Ref. CL1-N Case Ref. NOVA 4 AW Push-to-talk button (only available for locking connector) Ref. 7382-A – M34 Ref.
ARF37 User Guide Getting Started Keyboard Description The keyboard allows you to select the functions and their options. This is a capacitive keyboard. It will be more efficient when pressing the button on the sign. The available keys are as follows : Keys Description Power On/Off Key active during parameters setting Menu Access to the device settings menu OK Option selection In the device settings menu, the buttons allow you to adjust the parameters.
ARF37 User Guide Function Usage To use a function, make sure you press the corresponding key for 2 seconds. To turn the device on, press the ON/OFF button for 2 seconds. To turn the device off, press the ON/OFF button for 2 seconds. Using the Screen and Keyboard Each device is composed of a screen which displays information and a keyboard for entering the different settings.
ARF37 User Guide The screen indicators are as follows : Indicators Description System status Y 1. 2 . . . .5.6 C1 T01 01 indicates the device in the system. The other numbers indicate the devices online in the conference. A dash over the number indicates that the listening of this device is validated.
ARF37 User Guide Setting a Conference To set a conference, you have to perform the following operations : 1. Assign a number to each device that will take part in the conference. 2. Define the radio channel used for the communication. 3. Enable the devices to enter the communication. All the parameters, including the volume settings, are stored and remain the same if the device is switched off or the battery removed.
ARF37 User Guide 3. Press OK to validate your choice. 4. Press to select another menu or OK to exit the Device setting menu. Changing the intensity of the noise filter Depending on the noise level in the place where the products will be used, you can choose an enhanced filter (F+) or a regular one (F). Procedure 1. From the main screen, press Device setting menu 2. Press 3.
ARF37 User Guide Procedure 1. From the main screen, press Device setting menu. 2. Press 3. In the Table setting menu, select the table using 4. Press OK to validate your choice. 5. Press to select another menu or OK to exit the Device setting menu. for 2 seconds to access the twice to access the Table setting menu. + or -. Enabling Devices to Enter a Conference To enable communication, devices must memorize an encryption key provided by device 01.
ARF37 User Guide Procedure Make sure that the following requirements are met before starting the procedure : y All the devices must use the same table. y Only one device has the identifier 01. Operations on device 01 Operations on the other devices 1. On all the devices, press setting menu. 2. On all the devices, press for 2 seconds to access the Device 3 times to access the encryption. 3. On all the devices, press OK to proceed 5.
ARF37 User Guide Using the Devices Using the Listener Mode You can use a device as a listener only. In the listener mode, the device can only receive and hear other devices in the conference. It does not enable you to speak. IMPORTANT The listener can only work if you have proceeded to the encryption. The listener only works if at least 2 devices (01 and another) are in the conference. Procedure 1. Press 2. Press 3. Press OK to proceed. for 2 seconds to access the Role setting screen.
ARF37 User Guide Procedure 1. Press 2. Press + until the role proposed is “system listener”. 3. Press + for 2 seconds to access the listener selection screen. 4. Press OK to enter. 5. Press 6. Press OK to update. 7. When the modifications are finished, press for 2 seconds to access the Role setting screen. + or - to select the device. to exit. Setting the Volume To set the volume, proceed as follows : + or - key for 2 1. Make sure you are on the main screen. Press the seconds. 2.
ARF37 User Guide Procedure 1. In the main screen, press OK for 2 seconds until appears on the screen. The keypad buttons are no longer available for use except the On/Off button. 2. To unlock the keypad press OK for 2 seconds until the disappears. NOTE The keypad is automatically locked when you switch on the device. Reloading the Battery You can reload the batteries before they are unloaded. The batteries are reloaded in 3 to 4 hours. Their autonomy is 8 to 16 hours.
ARF37 User Guide Troubleshooting Frequent problems are outlined below to help you solve them. I cannot communicate with other devices. y y Check that all the devices have the same hopping frequency table. Check that one device is identified with number 01. The device cannot enter the conference. y y Make sure all the devices have been encrypted to enter the conference - especially if you have added a device after having started the conference. Avoid assigning the same number to several devices.